Wireless Valve Control

2016-wireless-valvesTucor’s Nexus Wireless Valve Control is a complete wireless system for powering and operating your new or existing DC latching valves. Wireless networks are formed around a gateway embedded in any irrigation controller, which acts as the wireless network master device with one or more WVR (Battery Powered DC Latching Receiver).  Nexus Wireless Valve Control System can connect irrigation valves, pump start relays, and soil moisture sensors to any manufacturers’ controller with these capacities.

Wireless Valve Control

  • The remote radio provides the appropriate electric signal to either open or close a standard latching solenoid
  • Nexus Base available in 6  valve capacities in Point to Point or Star Configurations
  • Nexus Link available in 8 valve increments up to 96 total with repeater and mesh configurations
  • WVR housing is rated for Dust and Water Spray Environments (IP65)
  • The WVR comes mounted in a 12” water resistant ground level box with external antenna
  • Nexus Base can be used with all manufacturers’ controllers, both decoder* and standard terminal output. *Requires additional relay
  • Because the radio only momentarily energizes its output per request, the lithium-ion battery can operate for several years depending on scheduling
    frequency
  • Built in RSSI (Radio Signal Strength Indication)
  • 900 MHz 1 Watt Spread Spectrum license free

 

Check out the details on the documents linked below.

Wireless Valves Site Report Meridian

WDR-400 Gateway and Receiver Network

Nexus Wireless Valve System Tech Spec

Tucor Wireless Valve Control Cutaway

reciever2